Landscape, security, and exterior lighting installation built to survive salt air, from Klean Power Electric, licensed and serving Broward County since 1995.
A dark property limits the safety, appearance, and usability of outdoor spaces. Klean Power Electric provides residential & commercial outdoor lighting services throughout Fort Lauderdale, including Las Olas, Coral Ridge, Victoria Park, and Plantation. Outdoor lighting installations are designed to highlight landscaping, improve visibility, and extend the use of patios.Our Services include landscape lighting, pathway lights, security floodlights, accent lighting, patio string lights, and custom exterior lighting systems.
South Florida’s climate demands lighting systems that can withstand humidity, salt air, intense sun exposure, and heavy rain. Our experienced outdoor lighting electrician properly sizes transformers, manages voltage drop, and installs weather-rated fixtures built for long-term performance. Lighting for residential properties, retail storefronts, office buildings, HOA communities, and commercial facilities is installed to deliver consistent illumination, reliable operation, and enhanced curb appeal from the front entrance to the back perimeter.
Klean Power Electric designs and installs custom outdoor lighting systems across Broward County, enhancing safety, visibility, and curb appeal. With flat-rate pricing, durable weather-resistant fixtures, and same-day scheduling, professional outdoor lighting is just one call away.
A Fort Lauderdale home without exterior lighting loses curb appeal, safety, and usable space the moment the sun sets. Dark walkways create trip hazards, unlit side yards invite trouble, and a backyard that goes black at sunset wastes the outdoor living space the home was built around. Most older homes still run on a single porch light and nothing more.
Klean Power Electric designs outdoor lighting systems that cover every zone, from the front walk and driveway to the pool deck and tree canopy. Trained electricians size the transformer, manage voltage drop, aim fixtures after dark, and use marine-grade hardware built for salt air and storm season. The property stays lit, safe, and code-compliant.
Most outdoor lighting work in Fort Lauderdale is residential, and every home uses its yard differently. A front-yard system lifts curb appeal and lights the walk to the door, while backyard, patio, and pool zones turn dark space into usable evening living. Single-family homes, condos, and waterfront lots each call for their own fixture mix and beam angles.
Klean Power Electric designs the layout, sizes the transformer, and selects marine-grade brass and 316 stainless fixtures built for salt air. Our Trained electricians wire each zone low-voltage or line-voltage as needed, bury the cable, and aim every beam after dark, so the whole property lights up evenly and stays glare-free.
Businesses across Broward County rely on exterior lighting for safety, security, and a professional look after hours. Storefronts, offices, multi-family buildings, and HOA common areas need bright, even coverage across parking areas, walkways, facades, and entries, sized for larger loads and longer cable runs than a typical home.
Our licensed electricians handle high-output LED area and pole lighting, facade and signage fixtures, and security floods, all wired to NEC and Florida code. Photocells, timers, and smart controls automate dusk-to-dawn operation, and permits and inspections get handled end to end, so the property stays lit, compliant, and low-maintenance.
A trained electrician walks the property, identifies trees, architecture, walkways, and dark zones, and maps fixture locations for every area. The design consultation happens at dusk or after dark so the real lighting needs are visible.
Klean Power Electric prices the job in writing, covering fixtures, transformer, wire, trenching, and labor. Customer-supplied fixtures are welcome, and the quote includes a workmanship warranty with no surprise add-ons.
Our electrician mounts the transformer, trenches and buries low-voltage cable, sets path lights, stakes spots, and wires every connection with waterproof, gel-filled connectors. Line-voltage fixtures get proper conduit and weatherproof junction boxes.
Every fixture gets aimed after dark. The electrician checks for glare, dark gaps, and voltage drop at the furthest fixture with a multimeter. The homeowner sees the finished zones, timer programming, and smart controls in action before the electrician packs up.
As a locally owned and operated electrical contractor, Klean Power Electric has served South Florida homeowners and businesses for more than three decades. Every outdoor lighting project is completed by licensed professionals focused on safety, quality workmanship, and long-term reliability.
Outdoor lighting near the coast requires materials that can withstand constant exposure to humidity and salt air. Our team recommends durable brass, copper, and 316 stainless steel fixtures that resist corrosion and deliver reliable long-term performance.
Different outdoor lighting systems require different installation methods and code considerations. From landscape lighting and floodlights to pool deck and dock lighting, our electricians install systems that meet current electrical standards and operate safely.
Proper placement and testing are essential for effective outdoor lighting. Fixtures are adjusted for balanced coverage, and long wiring runs are tested to help prevent dim areas, uneven illumination, and unnecessary glare.
Planning an outdoor lighting project should be simple and stress-free. Free estimates, written flat-rate quotes, and prompt scheduling help homeowners move forward with confidence, while clear pricing ensures there are no unexpected costs along the way.
From landscape lighting and security floodlights to pool deck, patio, dock, and smart lighting systems, Klean Power Electric delivers custom outdoor lighting solutions throughout Broward County. Our licensed electricians provide upfront flat-rate pricing, expert installation, and convenient same-day scheduling.
Monday 9 AM - 5 PM Tuesday 9 AM - 5 PM Wednesday 9 AM - 5 PM Thursday 9 AM - 5 PM Friday 9 AM - 5 PM Saturday Closed Sunday Closed
Your trusted local electrician serving homes and businesses throughout Broward County with professional, code-compliant electrical services.
Klean Power Electric provides residential, commercial, and industrial electrical services across Fort Lauderdale and Broward County. Core services include:
Fort Lauderdale is a city where coastal beauty and everyday convenience come together. From the waterfront communities along the Intracoastal Waterway to the busy commercial corridors throughout the city, residents and business owners rely on dependable infrastructure to support modern living. With a strong mix of residential neighborhoods, retail centers, offices, and hospitality properties, Fort Lauderdale continues to be one of South Florida’s most active and desirable places to live and work.
The local climate and coastal conditions can create unique challenges for property systems over time, making professional maintenance and quality workmanship essential. Whether serving a family home, condominium, office building, or commercial facility, Klean Power Electric provides trusted electrical services tailored to the needs of Fort Lauderdale properties. The company is committed to delivering safe, efficient, and code-compliant solutions that help keep homes and businesses running smoothly throughout the year.
A basic low-voltage landscape lighting system with a transformer and 6 to 8 path lights runs about $1,200 to $2,200 in Fort Lauderdale. A mid-range system with 10 to 15 fixtures, mixing path lights, spots, and well lights, lands in the $2,500 to $4,500 range. Premium systems with 20 or more brass fixtures, smart controls, and multiple zones start around $5,000 and can reach $10,000 or more. A single hardwired security floodlight install typically runs $185 to $385. All quotes are written flat-rate before work starts.
Low-voltage systems run on 12 volts through a step-down transformer and are the standard for landscape lighting, path lights, spotlights, well lights, and tree-mounted downlights. Line-voltage systems run on 120 volts and are used for hardwired wall fixtures, floodlights, post lanterns, and motion sensor security lights. Low-voltage is safer to work around, easier to expand, and more energy-efficient. Line-voltage is needed where high output, motion sensors, or direct panel wiring is required.
A straightforward outdoor light installation with 6 to 10 fixtures typically takes half a day. A full property design with 15 to 25 fixtures, trenching, a smart controller, and nighttime aiming usually takes one full day. Large or multi-zone systems, pool deck lighting, and dock lighting projects may stretch across two days. The electrician handles aiming after dark on the install day so the lights perform correctly from night one.
Solid brass and copper fixtures last the longest in coastal South Florida. Both metals resist salt-air corrosion naturally and develop a protective patina over time. Marine-grade stainless steel, specifically Type 316 with molybdenum, is the next best option. Powder-coated aluminum holds up reasonably well west of US-1 with regular cleaning. Painted aluminum and plastic fixtures degrade fast in Fort Lauderdale humidity and UV, often failing within one to three years near the coast.
A like-for-like replacement of an existing outdoor fixture and a low-voltage landscape system with a plug-in transformer generally do not require a permit. A permit is required when new circuits are added, new line-voltage wiring is run, pool or dock lighting is installed, or a dedicated circuit is wired to the panel for a transformer. Klean Power Electric handles any permit needed through City of Fort Lauderdale Building Services or Broward County, so the work is inspected and code-compliant.
Industry estimates suggest professional outdoor lighting can boost a home's perceived value by 5 to 20 percent. The return on investment typically falls between 50 and 70 percent of project cost at resale. A well-lit property stands out in evening showings and online listing photos, signaling a well-maintained home. Functional additions like lit walkways, security lighting, and usable outdoor living areas add both safety and buyer appeal.
Properties east of the Intracoastal or adjacent to nesting beaches in Broward County must comply with the sea turtle lighting ordinance from March 1 through October 31. Turtle-safe lighting follows three rules: keep fixtures low, fully shielded so the bulb is not visible from the beach, and use long-wavelength amber or red LEDs at 560 nm or greater. Standard white outdoor lights visible from the beach are a violation and carry fines. The electrician installs compliant fixtures and aim patterns that meet the ordinance.
Dim fixtures at the far end of a low-voltage system almost always trace to voltage drop. The wire is too thin for the run length, the transformer is undersized, or too many fixtures are daisy-chained on a single cable. The fix involves upsizing to 12 AWG or 10 AWG wire, splitting fixtures onto separate home runs, or using a multi-tap transformer set to a higher voltage tap. A multimeter test at the last fixture confirms the reading is in the correct operating range.
Yes. NEC 680 requires GFCI protection for all lighting circuits around pools and spas. Fixtures near the water must be wet-rated and listed for pool or spa use. Junction boxes must sit at least 4 feet horizontally from the pool wall and at least 8 inches above the maximum water level. All metallic parts within 5 feet of the water must be bonded with #8 AWG solid copper. The electrician handles the wiring, bonding, and permit so the pool area lighting installation meets code.
Yes. Dock and seawall lighting is common in waterfront Fort Lauderdale neighborhoods like Las Olas Isles, Rio Vista, Nurmi Isles, and Harbor Beach. These installs require marine-grade fixtures rated for direct salt spray and wet locations, along with GFCI protection and corrosion-resistant mounting hardware. The electrician selects brass, bronze, or 316 stainless fixtures and runs wiring in marine-rated conduit to handle the coastal environment long-term.
Uplighting places a fixture at ground level and aims the beam upward into a tree canopy, along a column, or across a textured wall. The effect adds drama and highlights shape and texture. Downlighting mounts a fixture high, usually in a tree or under an eave, and aims the beam downward to create soft, moonlight-style illumination. A professional outdoor lighting design layers both techniques with path lights and accent fixtures to create depth and contrast instead of flat, even flooding.
Front-yard lighting installation usually calls for 6 to 12 fixtures depending on lot size, tree count, and walkway length. A full-property design covering front, back, and side yards plus a patio area often lands in the 15 to 25 fixture range. Pool decks, docks, and large lots push the count higher. The electrician maps the layout during the on-site design consultation and balances fixture count against transformer capacity and budget.
Yes. Commercial-grade string lights with heavy-duty suspension wire and shatterproof LED bulbs are the standard for permanent patio and pergola installations in Fort Lauderdale. The electrician mounts guide wires, secures the string to rated attachment points, and connects the run to a switched or smart-controlled circuit. Commercial-grade sets handle Florida wind, rain, and humidity far better than retail-grade sets that sag, fade, and fail within a season.
Yes. Outdoor lighting integrates smoothly with Lutron Caseta, Lutron RadioRA 3, and FX Luminaire Luxor controllers. The electrician pairs outdoor zones with the existing app, voice assistant, or wall keypad so the outside lighting installation ties into the same schedules and scenes as the interior. Timers, photocells, and astronomical clocks automate dusk-to-dawn operation without daily manual switching.
Quality LED landscape fixtures are rated for 40,000 to 50,000 hours of use, which translates to roughly 15 to 20 years at typical dusk-to-midnight run times. LEDs also produce far less heat than halogen bulbs, reducing fire risk in mulch beds and near dry vegetation. The main failure points in an outdoor LED system are usually the wire connections and transformer, not the fixtures themselves, which is why waterproof connectors and proper transformer sizing matter as much as the lights.
